CENTRIFUGAL PUMP Industrial - Self-Prime - 3" - 7.5 Hp - 230V - 1 Ph - 390 GPM

Description

*WE OFFER FREE SHIPPING TO ANYWHERE IN THE CONTIGUOUS (LOWER 48) UNITED STATES.
ALL OTHER DESTINATIONS, PLEASE CONTACT US FOR A FREIGHT QUOTE*
________________________________________________________________________________________________________________
Model:
VIR287995
Condition:
New
Description:
Centrifugal Pump - Self Priming - Industrial/Commercial
Features:
3" Suction & Discharge - 23,400 GPH (390 GPM) - 7.5 Hp - 230 Volt - 1 Phase - 31 Amps - 48 PSI - 110 Ft Head - 3/8" Solids Handling Capacity - 180ºF Maximum Temperature - Self-Priming to 20 Ft - Cast Iron Construction - Designed for a Broad Range of High Capacity Applications Including Dewatering, Liquid Transfer, Circulation, Drainage, Irrigation and Similar - Dual Volute Design - Centerline Discharge Prevents Vapor Locking -  Self Cleaning, Semi-Open Stainless Steel Impeller - Built in Check Valve - Fill and Drain Plugs for Easy Installation and Service - Available in Explosion Proof/Hazardous Location Confirguration (please inquire) - Made
in the USA
Payment Options:
We Accept all Major Credit Cards, Personal & Business Checks, Bank Wire Transfers and Financing Through PayPal Credit
Shipping:
We Ship Worldwide via Air, Ocean and Common Carrier.  Contact us for a Freight Quote if Shipment is going Outside of the Lower 48 United States
Discounting:
We offer Multiple Item Purchase Discounts - Please Inquire
______________________________________________________________________________________________________
SEE OUR FULL LINE OF
COMMERCIAL & INDUSTRIAL WATER PUMPS
BY FOLLOWING THIS LINK:
OUR LINE OF COMMERCIAL & INDUSTRIAL WATER PUMPS
This Series of Centrifugal Pumps are Available in the Following Configurations
:
Model VIR287795 - 3 Hp - 230V - 1 Phase - 16 Amps - 255 GPM - 65 Ft Head - 28 PSI - 3" Inlet/Outlet
Model VIR287495 - 3 Hp - 208-230/460V - 3 Phase - 10/5 Amps - 255 GPM - 65 Ft Head - 28 PSI - 3" Inlet/Outlet
Model VIR287895 - 5 Hp - 230V - 1 Phase - 21 Amps - 325 GPM - 90 Ft Head - 39 PSI - 3" Inlet/Outlet
Model VIR287595 - 5 Hp - 208-230/460V - 3 Phase - 14/7 Amps - 325 GPM - 90 Ft Head - 39 PSI - 3" Inlet/Outlet
Model VIR287995 - 7.5 Hp - 230V - 1 Phase - 31 Amps - 390 GPM - 110 Ft Head - 48 PSI - 3" Inlet/Outlet
Model VIR287695 - 7.5 Hp - 208-230/460V - 3 Phase - 20/10 Amps - 390 GPM - 110 Ft Head - 48 PSI - 3" Inlet/Outlet
Available Options
: Explosion proof/hazardous location configuration, Viton Seal, O Ring and Flapper Valve (factory installed), Silicon Carbide/Viton Seal, O Ring and Flapper Valve (factory installed)
We carry a full line of pumps in electric, gas and diesel engine, belt and direct drive configurations as well as a full line of accessories and components throughout the year.  All of our pumps are manufactured and factory tested before shipment here in the USA
Questions?  Click the "Contact Seller" Link Above
Description & Specifications:
Industrial/Commercial Heavy Duty Self-Priming Centrifugal Pump
Our line of USA made industrial/commercial centrifugal pumps are designed for continuous operation and recommended for use in dewatering, liquid transfer, circulation, drainage, irrigation and similar applications
This series of industrial/commercial centrifugal pumps is available with 3" threaded suction and discharge ports
Features: Self-priming, dual volute design to reduce radial load on motor, centerline discharge prevents vapor locking/binding and provides convenient piping connections, self-cleaning, semi-open stainless steel impeller, 3/8" solids handling, built-in check valves for fast priming and fill and drain plugs for easy installation and maintenance and servicing
Pump Type: Centrifugal - Industrial/Commercial
Suction Port: 3" NPT Threaded
Discharge Port: 3" NPT Threaded
Flow: 23,400 GPH (390 GPM)
Motor: 7.5 Hp - TEFC
Voltage: 230V
Phase: 1
Amp Draw: 31
PSI: 48
Solids Handling: 3/8"
Total Head: 110 Ft
Maximum Temperature: 180ºF
Construction: Cast Iron
Impeller: Stainless Steel - Self-Cleaning - Semi-Open
Sleeve: Stainless Steel
Voluge: Dual
Seal, Check Valve & O Ring: Buna-N Mechanical (optional Viton and Silicon Carbide available - see Optional Items below)
Self-Priming: to 20 Ft
Power Cord: N/A - this is a hardwire pump.  We recommend a licensed and insured electrician to run power to this pump
Optional Item:
Model VIR287X300V0
- Viton Seal, O Ring & Flapper Valve - Factory Installed - (please inquire
)
Optional Item:
Model VIR287X300VS
- Carbide/Viton Seal, O Ring & Flapper Valve - Factory Installed - (please inquire
)
Optional Item:
Model VIRA20090
- Mounting Base for 182, 184 & 215 JM Frames - Factory Installed - (please inquire
)
Optional Item:
Model VIRA200K0
- Motor Base - Factory Installed - (please inquire
)
Overall Dimensions: 31.1" L x 13.9" W x 11.8" H
Weight: 215 Lbs
1 Year Warranty (Includes Parts & Labor)
Made in the U.S.A.
*WE OFFER FREE SHIPPING TO ANYWHERE IN THE CONTIGUOUS (LOWER 48) UNITED STATES.
ALL OTHER DESTINATIONS, PLEASE CONTACT US FOR A FREIGHT QUOTE*