Car Blind Spot Monitoring Radar Detection System Ultrasonic Sensor System Kits

Description

Car Blind Spot Monitoring Radar Detection System Ultrasonic Sensor System Kits
Description
Introduction:
1.Thanks for choosing the blind spot monitoring lane-merging assistant driving system produced by our company. The product is composed of two 77Ghz millimeter wave radars, two indicators (or special vehicle blind-spot-type rear view mirror), one buzzer and connecting harness.
2.This system product will produce the pre-warning to the hazardous targets on both left and right adjacent lanes.
3.This system includes the four functions of BSD,LCA,RCT and AOA.
4.Its unique capacities of penetrating the smoke, fog and dust can realize the all-weather and all-time application,as well as detect the speed, angles and relative movement for 32 objects.
5.It is able to detect the target as far as 50 meters at maximum, and finally output the warning signals. The warning signals include the Level 1 Warning and Level 2 Warning.
Function Description:
Level 1 Warning: Indicator lamp is always on
Level 2 Waming: Indicator lamp flashes+Buzzer emits prompt tone
1.BSD Blind Spot Pre-warning (Detection range: Horizontally 4 meters, longitudinally 15 meters)
Working Logic: Vehicle's own speed is higher than 10Km/Hour BSD pre-warning mode is started:
A. If the target object enters the radar signal area with the
faster speed (the turn signal lamp of this vehicle is not turned on), it will produce the Level 1 Warning until the target object leaves the monitoring area,and the warning is canceled.
B.If the target object enters the radar signal area with the faster speed (the turn signal lamp of this vehicle is turned on),it will produce the Level 2 Warning until the target object leaves the monitoring area, and the warning is canceled.
2. LCA Vehicle Approaching Pre-warning (Detection range: Horizontally 4 meters, longitudinally 50 meters)
Working logic: Start after powering on, the target object enters the alarming range and the relative collision time<3.5 seconds, LCA vehicle approaches the pre-warning mode is started:
A. When the target object enters the alarming scope (the turn
signal lamp of this vehicle is not turned on), it will produce the Level 1 Warning until the target object leaves the alarming area, and the warning is canceled;.
B. When the target object enters the alarming scope (the turn
signal lamp of this vehicle is turned on), it will produce the Level 2 Warning until the target object leaves the alarming area, and the warning is canceled.
3.AOA Overtaking Pre-warming (Detection range: Horizontally 4 meters, longitudinally 15 meters)
Working logic: Vehicle's own speed is higher than 10km/Hour, AOA overtaking pre-warning mode is started:
A. This vehicle positively overtakes the other vehicles with
speed and the target object is within the alarming scope, it will produce the Level 1 Warning until the target object leaves the warning area, and the warning is canceled.
B. This vehicle positively overtakes the other vehicles with
speed, the target object is within the alarming scope and the turn signal lamp on the corresponding side is turned on, it will produce the Level 2 Warning until the target object leaves the alarming area,and the warning is canceled.
4. RCT Reversing Pre-warning (Detection range: Horizontally 5 meters, longitudinally 5 meters)
Working logic: Put into R (reversing gear), RCT revering pre-warning mode is started:
When the target object enters the alarming scope, it will produce the Level 2 Warning until the target object leaves the alarming area, and the warning is canceled.
Specifications:
Working voltage:10-36V
Working frequency band:77-81Ghz
Working temperature：-40℃ ～ +85℃
Power consumption：< 2W
Water-proof level：Ip67
Distance resolution ：0.5m
Range accuracy ：Superior to 0.18m
Detection distance ：50m
Transceiving antenna: double send and four receive
Radar chip: TI
Microcontroller chip: ST
Block the third lane: yes√ yes
Same speed follow warning: √ yes
B-pillar warning: No
BSD blind spot monitoring: √ yes(start at own vehicle speed>20Km/hour)
LCA lane change assist: √ yes(start at own vehicle speed>20Km/hour)
AOA overtaking warning: √ yes(start at own vehicle speed>20Km/hour)
RCTA reversing warning: √ yes(5 meters, start with reverse gear)
The package:
77Ghz millimeter wave radar*2
In-vehicle pre-warning indicator*2
Power line with buzzer*1
Power extension line （5M）*1
Extension line of indicator lamp*2
Radar line*1
Mounting bracket *2
Cable tie *Several
Standby double-sided adhesive tape *2
Adhesion promoter *4
Bevel protractor*1
Instruction Manuel*1
Installation diagram, circuit connection diagram, installation method and precautions please see the description in the picture
Suggestion:
1. It is recommended that the installation be carried out by professionals.
2. The installation angle of radar will affect the detection distance and effect. Please install it strictly according to the instructions.
3. Rainstorm weather may affect the detection distance and effect.
4. Moving objects approaching 3M behind the vehicle may not be monitored.
5. Because of manual measurement, there may be a change of 1-3 mm (cm).
Note:
1.Transition: 1cm=10mm=0.39inch
2.Please allow 1-3cm error due to manual measurement. pls make sure you do not mind before you bid.
3.Due to the difference between different monitors, the picture may not reflect the actual color of the item.
Terms & Conditions
Payment
We accept payment via
Credit Card、Debit Card、Apple Pay、Google Pay or PayPal etc.
Payment must be made within 4 days of auction closing. or an updaid case will be open on ebay automatically.
Please contact us via ebay massage to list your special requests (color, packages, etc.) immediately you paid for the order.
Shipping
We arrange the shipment from Monday to Friday. Shipping fee includes packaging and handling fees.
Items will be send out within 1 business day after Payment Verified (Available on business days only).
Please check your ebay shipping address before payment, and make sure it contain a valid phone number because almost all shipping request phone number,
we may hold the order if phone number is missing
.
If the item is from China, we will ship by safer way,sometimes may need to pay tax by buyer,we don't take responsibility if buyer don't clear the customs.
Return
Please contact us for a solution via ebay massage before open a return. Communication always is best way to solve problem.
We accept any return in 14 or 30 days that we promise.
If buyer return it just because buyer don't like it or bought a wrong item, it is buyer pay for return shipping fee.
If item is defect or wrong when arrives, we will pay for the shipping fee after buyer show the shipping invoice.
Please never return the parcel without agreement
, if you don't get RMA NO. from us, it is no possible for us to get the parcel. and we will take no further auction for the return.
Feedback
We will automatically leave positive feedback to every buyer who completed the transaction.
Please DO LEAVE us FOUR 5- Detailed Selling Rating (DSR) and give Positive feedback which may help a lot for our business development. Because the Ratings below 5 are equal to "You are NOT satisfied. Your recognition is our motivation in developing our small company and improving our service for each customer. It'll take you one minute only.
If you're not satisfied with our goods or service, please write to us immediately so that we can help you out. Sincerely hope you do not leave us any negative or neutral feedback. Communication is very important, we believe we can resolve all the problem with each other.
Terms & Conditions
We are legal company and honese seller, will protect every customer's profit. Any thought, please feel free to contact us. We will give you the best advise.
We welcome to answer any questions you have. Please send us a message through eBay and we will answer you within 24 hours.
Our working time: 8:30 AM - 18:00 PM (Beijing Time GMT+8 ), Monday - Friday. (weekend and holidays excluded).